Paper | Title | Other Keywords | Page |
---|---|---|---|
MOPOPT003 | Studying Instabilities in the Canadian Light Source Storage Ring Using the Transverse Feedback System | storage-ring, feedback, insertion-device, damping | 230 |
|
|||
The Transverse Feedback system at the Canadian Light Source can identify, categorize, and mitigate against periodic instabilities that arise in the storage ring beam. By quickly opening and closing the feedback loop, previously mitigated instabilities will be allowed to grow briefly before being damped by the system. The resulting growth in the beam oscillation amplitude curve can be analyzed to determine growth/damp rates and modes of the coupled bunch oscillations. Further measurements can be collected via active excitement of modes rather than passive growth. These Grow/damp and Excite/Damp curves have been collected and analyzed for various storage ring beam properties, including beam energy, machine chromaticity, and in-vacuum insertion device gap widths. | |||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOPT003 | ||
About • | Received ※ 08 June 2022 — Revised ※ 14 June 2022 — Accepted ※ 15 June 2022 — Issue date ※ 09 July 2022 | ||
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
MOPOTK018 | Parallelization of Radia Magnetostatics Code | interface, insertion-device, SRF, synchrotron | 481 |
|
|||
Funding: Work supported by the US DOE BES SBIR grant No. DE-SC0018556. Radia 3D magnetostatics code has been used for the design of insertion devices for light sources over more than two decades. The code uses the magnetization integral approach that is efficient for solving permanent magnet and hybrid magnet structures. The initial version of the Radia code was sequential, its core written in C++ and interface in the Mathematica language. This paper describes a new Python-interfaced parallel version of Radia and its applications. The parallelization of the code was implemented on C++ level, following a hybrid approach. Semi-analytical calculations of interaction matrix elements and resultant magnetic fields were parallelized using the Message Passing Interface, whereas the parallelization of the "relaxation" procedure (solving for magnetizations in volumes created by subdivision) was executed using a shared memory method based on C++ multithreading. The parallel performance results are encouraging, particularly for magnetic field calculation post relaxation where a ~600 speedup with respect to sequential execution was obtained. The new parallel Radia version facilitates designs of insertion devices and lattice magnets for novel particle accelerators. |
|||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOTK018 | ||
About • | Received ※ 20 May 2022 — Revised ※ 10 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 29 June 2022 | ||
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
MOPOTK024 | Quasi-Frozen Spin Concept of Magneto-Optical Structure of NICA Adapted to Study the Electric Dipole Moment of the Deuteron and to Search for the Axion | storage-ring, dipole, lattice, proton | 492 |
|
|||
Funding: We acknowledge a support by the joint Deutsche ForschungsGemeinschaft (DFG) and Russian Science Foundation (RSF) grant 22-42-04419 The "frozen spin" method is based on the fact that at a certain parameters of the ring, the particle spin rotates with the frequency of the momentum, creating conditions for the continuous growth of the electric dipole moment signal. Since a straightforward implementation of the frozen spin regime at NICA is not possible, we suggest an alternative quasi-frozen spin approach concept. In this new regime, the spin oscillates about particle orbit with the spin phase advance pi*gamma*G/2, locally recovering the longitudinal orientation at the location of the electric-magnetic Wien filters in the straight sections. In the case of deuterons, thanks to the small magnetic anomaly G, the spin continuously oscillates relative to the direction of the momentum with a small amplitude of a few degrees and the expected EDM effect is reduced only by a few percent. In this paper, we study the spin-orbital motion with the aim of using the NICA collider to measure the EDM. We also comment on the potential of NICA as an axion antenna in both the quasi-frozen spin regime and beyond. |
|||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOTK024 | ||
About • | Received ※ 16 May 2022 — Revised ※ 11 June 2022 — Accepted ※ 12 June 2022 — Issue date ※ 01 July 2022 | ||
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
MOPOTK037 | Impact of Insertion Devices on Diamond-II Lattice | optics, insertion-device, emittance, lattice | 539 |
|
|||
Funding: DLS ltd The DIAMOND-II lattice is based on the ESRF-EBS cell, with the centre dipole replaced by a (chromatic) mid-straight, and a -I transformer, higher order achromat (HOA) & dispersion bumps to control the nonlinear dynamics. The majority of insertion devices currently on operation in Diamond will be either retained or upgraded as part of the Diamond-II program, and the new mid straights allow the total number of ID beamlines to be increased from 28 to 36.Therefore, it is important to investigate how IDs will affect the emittance, energy spread and linear and nonlinear beam dynamics. The kickmap approach has been used to model all IDs, including APPLE-II and APPLE-II Knot with active shim wires. In this paper, the outcome of these investigations will be presented and discussed. |
|||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOTK037 | ||
About • | Received ※ 04 June 2022 — Accepted ※ 30 June 2022 — Issue date ※ 07 July 2022 | ||
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
TUPOMS014 | PETRA IV Storage Ring Design | lattice, emittance, damping, insertion-device | 1431 |
|
|||
PETRA IV will be a diffraction-limited 6 GeV synchrotron light source with an emittance of 20 pm rad at DESY Hamburg. The TDR phase is nearing completion, and the lattice design is being finalised. The lattice will be based on the six-bend achromat cell with extensive use of damping wigglers. The key challenges of the lattice design are finding the balance between emittance minimisation and non-linear beam dynamics performance, and adapting the lattice to a collider-type tunnel geometry of the PETRA facility, with the long straight sections and low degree of superperiodicity. We present the lattice design and the beam physics aspects, focusing on the beam dynamics performance and optimisation, and the projected beam parameters taking collective effects and lattice imperfections into account. | |||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOMS014 | ||
About • | Received ※ 08 June 2022 — Revised ※ 14 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 26 June 2022 | ||
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
TUPOMS023 | The Elettra 2.0 Project | cavity, insertion-device, emittance, operation | 1459 |
|
|||
The project status of the future Italian 2.4 GeV fourth generation light source Elettra 2.0 that will replace the third-generation light source Elettra is presented. Elettra 2.0 will be the ultra-low emittance light source that will provide ultra-high brilliance and coherence and at the same time aims to provide very short pulses for time resolved experiments. | |||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOMS023 | ||
About • | Received ※ 23 May 2022 — Revised ※ 13 June 2022 — Accepted ※ 15 June 2022 — Issue date ※ 23 June 2022 | ||
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
TUPOMS038 | RFQ NEWGAIN: RF and Thermomechanical Design | rfq, cavity, linac, proton | 1510 |
|
|||
Funding: Agence Nationale de la Recherche (ANR) A new injector called NEWGAIN will be added to the SPIRAL2 Linear Accelerator (LINAC), in parallel with the existing one. It will be mainly composed of an ion source and a Radio Frequency Quadrupole (RFQ) connected to the superconductive LINAC of SPIRAL2. The new RFQ will accelerate at 88.05 MHz particles with charge-over-mass ratio (Q/A) between 1/3 and 1/7, from 10 keV/u up to 590 keV/u. It consists of a 4-vane resonant cavity with a total length of 7 m. It is a CW machine that has to show stable operation, provide the request availability, have the minimum losses in order to provide the highest current to the superconductive LINAC and show the best quality/cost ratio. This paper will present the preliminary RF design and the thermomechanical study for this RFQ. |
|||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOMS038 | ||
About • | Received ※ 08 June 2022 — Revised ※ 10 June 2022 — Accepted ※ 13 June 2022 — Issue date ※ 27 June 2022 | ||
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
WEPOPT061 | A Flexible Nonlinear Resonance Driving Term Based Correction Algorithm with Feed-Down | optics, luminosity, resonance, dipole | 1999 |
|
|||
Funding: This work has been supported by the HiLumi Project and been sponsored by the Wolfgang Gentner Programme of the German Federal Ministry of Education and Re-search. The optics in the insertion regions of the LHC and its upgrade project the High Luminosity LHC are very sensitive to local magnetic errors, due to the extremely high beta-functions. In collision optics, the non-zero closed orbit in the same region leads to a "feed-down" of high-order errors to lower orders, causing additional effects detrimental to beam lifetime. An extension to the well-established method for correcting these errors by locally suppressing resonance driving terms has been undertaken, not only taking this feed-down into account, but also adding the possibility of utilizing it such that the powering of higher-order correctors will compensate for lower order errors. Existing correction schemes have also operated on the assumption of (anti-)symmetric beta-functions of the optics in the two rings. This assumption can fail for a multitude of reasons, such as inherently asymmetric optics and unevenly distributed errors. In this respect, an extension of this correction scheme has been developed, removing the need for symmetry by operating on the two separate optics of the beams simultaneously. |
|||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOPT061 | ||
About • | Received ※ 07 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 15 June 2022 | ||
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
THPOPT035 | A Second Generation Light Source Aiming at High Power on the Giant Dipole Resonance | dipole, cavity, photon, resonance | 2661 |
|
|||
We propose an accelerator concept which could enable nuclear waste transmutation and energy amplification using a second generation light source rather than a high power proton beam. The main parameters of the ring and insertion devices are estimated, targeting a photon beam power of 1 GW with a spectrum that maximizes the potential for nuclear reactions via the Giant Dipole Resonance. The synergies with technologies developed for high energy physics, in particular within the Future Circular Collider study (FCC), are highlighted. | |||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOPT035 | ||
About • | Received ※ 03 June 2022 — Revised ※ 15 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 25 June 2022 | ||
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
THPOTK035 | Thermo-Mechanical Modeling and Thermal Performance Analysis of Beam Vacuum Line Interconnections and Cold Warm Transitions in HL-LHC Long Straight Section Magnets | cryogenics, luminosity, radiation, vacuum | 2839 |
|
|||
The HL-LHC upgrade, aiming at increasing the LHC levelled luminosity by factor of five, relies on new superconducting magnets requiring a new beam vacuum system. Along with the challenges related to magnet design, the beam optic configuration exposes this new equipment to stringent conditions for vacuum and cryogenic performance. Both cold-warm transitions and magnet interconnections appear to be delicate components that are crucial for the thermal heat transfer between diverse subsystems. The proposed study aims at assessing the heat loads to the cryogenic system and the temperature fields in the vacuum system. A nonlinear static thermal analysis is first performed. A thermo-mechanical approach is developed to capture additional thermal resistance arising from contact between components and their behaviour during cool-down. The system is then studied under dynamic operations when beams are circulating and colliding. A thorough analysis of beam-induced heat loads under ultimate conditions highlights the different relevant contributions. Finally, the transient response of the systems is computed to assess thermal time constants. | |||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOTK035 | ||
About • | Received ※ 08 June 2022 — Revised ※ 11 June 2022 — Accepted ※ 27 June 2022 — Issue date ※ 29 June 2022 | ||
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||