IPAC2022 - List of Authors (Harada, H.)

Paper	Title	Page
WEOYGD1	Recent Results of Beam Loss Mitigation and Extremely Low Beam Loss Operation of J-PARC RCS	1616
	P.K. Saha, H. Harada, T. Nakanoya, K. Okabe, H. Okita, Y. Shobuda, F. Tamura, M. Yoshimoto JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan H. Hotchi KEK, Tokai, Ibaraki, Japan
	In the 3-GeV RCS (Rapid Cycling Synchrotron) of J-PARC (Japan Proton Accelerator Research Complex), multi-turn charge-exchange injection of H⁻ by using a thin stripper foil is performed to achieve high-intensity proton beam of 1 MW. The beam loss at 1 MW has already been well controlled, but for further minimizing both uncontrolled and controlled beam losses caused by the foil scattering of the circulating beam, recently we have implemented a lower vertical injection beam size and installed a corresponding smaller size stripper foil. A smaller foil gives a significant reduction of the foil scattering uncontrolled beam loss at the injection area, while an optimization of the vertical transverse painting area matching with a smaller beam size further gives an extremely reduction of the beam loss at the collimator section. The corresponding residual radiation at the recent operation with 700 kW beam power was also measured to extremely reduced.
	Slides WEOYGD1 [1.161 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEOYGD1
About •	Received ※ 20 May 2022 — Revised ※ 13 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 24 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Recent Results of Beam Loss Mitigation and Extremely Low Beam Loss Operation of J-PARC RCS

1616

P.K. Saha, H. Harada, T. Nakanoya, K. Okabe, H. Okita, Y. Shobuda, F. Tamura, M. Yoshimoto
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
H. Hotchi
KEK, Tokai, Ibaraki, Japan

In the 3-GeV RCS (Rapid Cycling Synchrotron) of J-PARC (Japan Proton Accelerator Research Complex), multi-turn charge-exchange injection of H⁻ by using a thin stripper foil is performed to achieve high-intensity proton beam of 1 MW. The beam loss at 1 MW has already been well controlled, but for further minimizing both uncontrolled and controlled beam losses caused by the foil scattering of the circulating beam, recently we have implemented a lower vertical injection beam size and installed a corresponding smaller size stripper foil. A smaller foil gives a significant reduction of the foil scattering uncontrolled beam loss at the injection area, while an optimization of the vertical transverse painting area matching with a smaller beam size further gives an extremely reduction of the beam loss at the collimator section. The corresponding residual radiation at the recent operation with 700 kW beam power was also measured to extremely reduced.

Slides WEOYGD1 [1.161 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEOYGD1

About •

Received ※ 20 May 2022 — Revised ※ 13 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 24 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)