Paper | Title | Page |
---|---|---|
TUPOPT034 | Modelling of X-Ray Volume Excitation of the XLO Gain Medium Using Flash | 1081 |
|
||
Funding: This work was performed with the support of the US Department of Energy under Contract No. DE-AC02-76SF00515 and DESC0009914. Plasma dynamics and crater formation of laser excited volumes in solids is a complex process due to thermalization, shockwave formation, varying absorption mechanisms, and a wide range of relevant physics timescales. The properties and interaction of such laser-matter systems can be modeled using an equation of state and opacity based multi-temperature treatment of plasma using a radiation hydrodynamics code. Here, we use FLASH, an adaptive mesh radiation-hydrodynamics code, to simulate the plasma expansion following after the initial energy deposition and thermalization of the column, to benchmark the results of experiments undertaken at UCLA on optical laser ablation. These computational results help develop a quantitative understanding of the material excitation process and enable the optimization of the gain medium delivery system for the x-ray laser oscillator project *. * Halavanau, Aliaksei, et al. "Population Inversion X-Ray Laser Oscillator." Proceedings of the National Academy of Sciences, vol. 117, no. 27, 2020, pp. 15511-15516. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOPT034 | |
About • | Received ※ 08 June 2022 — Revised ※ 16 June 2022 — Accepted ※ 18 June 2022 — Issue date ※ 24 June 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUPOPT047 | Progress Report on Population Inversion X-Ray Laser Oscillator at LCLS | 1107 |
|
||
We report the progress in the design and construction of a population inversion x-ray laser oscillator (XLO) using LCLS as an x-ray laser pump, being developed by a SLAC, CFEL, University of Hamburg (Germany), University of Wisconsin, Josef Stefan Institute (Slovenia) and UCLA collaboration. In this proceeding, we will present the latest XLO design and numerical simulations substantiated by our first experimental results. In our next experimental step XLO will be tested on the Coherent X-ray Imaging (CXI) end-station at LCLS as a two pass Regenerative Amplifier operating at the Copper Kα1 photon energy of 8048 eV. When built, XLO will generate fully coherent transform limited pulses with about 50 meV FWHM bandwidth. We expect the XLO will pave the way for new user experiments, e.g. in inelastic x-ray scattering, parametric down conversion, quantum science, x-ray interferometry, and external hard x-ray XFEL seeding. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOPT047 | |
About • | Received ※ 12 June 2022 — Revised ※ 14 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 24 June 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
THPOTK053 | Foiled Again: Solid-State Sample Delivery for High Repetition Rate XFELs | 2899 |
|
||
Funding: Department of Energy DE-SC0009914 and DE-AC02-76SF00515 XFELs today are capable of delivering high intensity pulse trains of x-rays with up-to MHz to sub-GHz frequency. These x-rays, when focused, can ablate a sample in a single shot, requiring the sample material to be replaced in time for the next shot. For some applications, especially serial crystallography, the sample may be renewed as a dilute solution in a high speed jet. Here, we describe the development and characterization of a system to deliver solid state sample material to an XFEL nanofocus. The first application of this system will be an x-ray laser oscillator operating at the copper Kα line with a ~30 ns cavity. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOTK053 | |
About • | Received ※ 06 June 2022 — Revised ※ 15 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 02 July 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |