Author: Papaphilippou, Y.
Paper Title Page
MOOYSP1 Impact of Longitudinal Gradient Dipoles on Storage Ring Performance 30
 
  • F. Zimmermann, Y. Papaphilippou, A. Poyet
    CERN, Meyrin, Switzerland
 
  Funding: This project has received funding from the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No 101004730 (iFAST).
Innovative new magnets with longitudinally varying dipole field are being produced for installation in a few modern light-source storage rings. We investigate some of the associated beam-dynamics issues, in particular the photon spectrum and quantum fluctuation associated with such magnets, and we study whether the resulting equilibrium emittance may deviate from the value expected in the long-magnet limit.
 
slides icon Slides MOOYSP1 [2.364 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOOYSP1  
About • Received ※ 08 June 2022 — Revised ※ 09 June 2022 — Accepted ※ 12 June 2022 — Issue date ※ 17 June 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPOST056 Interplay between Space Charge and Intra-beam Scattering for the CERN Ion Injectors 214
SUSPMF073   use link to see paper's listing under its alternate paper code  
 
  • M. Zampetakis, F. Antoniou, F. Asvesta, H. Bartosik, Y. Papaphilippou
    CERN, Meyrin, Switzerland
 
  The CERN ion injectors, SPS and LEIR, operate in a strong space charge and intra-beam scattering regime, which can lead to degradation of their beam performance. To optimize machine performance requires thus to study the interplay of these two effects in combined space charge and intrabeam scattering tracking simulations. In this respect, the kinetic theory approach of intra-beam scattering has been implemented in pyORBIT and benchmarked against analytical models. First results of combined space charge and intra-beam scattering simulations for SPS and LEIR are presented in this contribution. The simulation results are compared with observations from beam measurements.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOST056  
About • Received ※ 07 June 2022 — Revised ※ 09 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 07 July 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEOZSP2 Suppression of Crab Cavity Noise Induced Emittance Growth by Transverse Beam Coupling Impedance 1659
SUSPMF068   use link to see paper's listing under its alternate paper code  
 
  • N. Triantafyllou, A. Wolski
    The University of Liverpool, Liverpool, United Kingdom
  • F. Antoniou, H. Bartosik, P. Baudrenghien, X. Buffat, R. Calaga, Y. Papaphilippou
    CERN, Meyrin, Switzerland
  • T. Mastoridis
    CalPoly, San Luis Obispo, California, USA
 
  Crab Cavities are a key component of the High Luminosity LHC (HL-LHC) upgrade, as they aim to minimize the luminosity reduction caused by the crossing angle. Two superconducting crab cavities were installed in the Super Proton Synchrotron (SPS) at CERN in 2018 to test their operation in a proton machine for the first time. An important point to consider is the increase in transverse emittance induced by noise in the Low-Level RF (LLRF) system. During the first experimental campaign in 2018, the measured emittance growth was found to be a factor of 4 lower than predicted by the available analytical models. In this report, the effects of transverse beam impedance in the presence of CC LLRF noise on transverse emittance growth are presented and the results of the second experimental campaign, which took place in the SPS in 2021, are discussed.  
slides icon Slides WEOZSP2 [2.694 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEOZSP2  
About • Received ※ 08 June 2022 — Revised ※ 12 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 15 June 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPOPT009 Operational Scenario of First High Luminosity LHC Run 1846
 
  • R. Tomás García, G. Arduini, P. Baudrenghien, R. Bruce, O.S. Brüning, X. Buffat, R. Calaga, F. Cerutti, R. De Maria, J. Dilly, I. Efthymiopoulos, M. Giovannozzi, P.D. Hermes, G. Iadarola, O.R. Jones, S. Kostoglou, E.H. Maclean, N. Mounet, E. Métral, Y. Papaphilippou, S. Redaelli, G. Sterbini, H. Timko, F.F. Van der Veken, J. Wenninger, M. Zerlauth
    CERN, Meyrin, Switzerland
 
  A new scenario for the first operational run of the HL-LHC era (Run 4) has been recently developed to accommodate a period of performance ramp-up to achieve an annual integrated luminosity close to the nominal HL-LHC design. The operational scenario in terms of beam parameters and machine settings, as well as the different phases, are described here along with the impact of potential delays on key hardware components.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOPT009  
About • Received ※ 19 May 2022 — Revised ※ 15 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 09 July 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPOPT013 Emittance Reduction with the Variable Dipole for the ELETTRA 2.0 Ring 2586
 
  • A. Poyet, Y. Papaphilippou
    CERN, Meyrin, Switzerland
  • M.A. Domínguez, F. Toral
    CIEMAT, Madrid, Spain
  • R. Geometrante, E. Karantzoulis
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
  • R. Geometrante
    KYMA, Trieste, Italy
 
  ELETTRA is a 2/2.4 GeV third-generation electron storage ring, located near Trieste, Italy. In view of a substantial increase of the machine performance in terms of brilliance, the so-called ELETTRA 2.0 upgrade is currently on-going. This upgrade is based on a 6-bends achromat, four dipoles of which having a longitudinally variable field. So far, those dipoles are foreseen to provide a field with a two step profile. The VAriable Dipole for the ELETTRA Ring (VADER) task, driven by the I.FAST European project, aims at developing a new dipole design based on a trapezoidal shape of the bending radius, which would allow for a further reduction of the horizontal emittance. A prototype of this magnet should be designed by the CIEMAT laboratory and built by KYMA company. This paper discusses the new dipole field specification and describes the corresponding optics optimization that was performed in order to reduce at best the emittance of the ELETTRA ring.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOPT013  
About • Received ※ 07 June 2022 — Revised ※ 09 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 03 July 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)