| Paper | Title | Page |
|---|---|---|
| TUPOST043 | A Novel Method for Detecting Unidentified Falling Object Loss Patterns in the LHC | 953 |
| SUSPMF100 | use link to see paper's listing under its alternate paper code | |
|
||
| Understanding and mitigating particle losses in the Large Hadron Collider (LHC) is essential for both machine safety and efficient operation. Abnormal loss distributions are telltale signs of abnormal beam behaviour or incorrect machine configuration. By leveraging the advancements made in the field of Machine Learning, a novel data-driven method of detecting anomalous loss distributions during machine operation has been developed. A neural network anomaly detection model was trained to detect Unidentified Falling Object events using stable beam, Beam Loss Monitor (BLM) data acquired during the operation of the LHC. Data-driven models, such as the one presented, could lead to significant improvements in the autonomous labelling of abnormal loss distributions, ultimately bolstering the ever ongoing effort toward improving the understanding and mitigation of these events. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOST043 | |
| About • | Received ※ 19 May 2022 — Revised ※ 15 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 21 June 2022 | |
| Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPOST001 | Radiation Load Studies for Superconducting Dipole Magnets in a 10 TeV Muon Collider | 1671 |
|
||
| Among the various future lepton colliders under study, muon colliders offer the prospect of reaching the highest collision energies. Despite the promising potential of a multi-TeV muon collider, the short lifetime of muons poses a severe technological challenge for the collider design. In particular, the copious production of decay electrons and positrons along the collider ring requires the integration of continuous radiation absorbers inside superconducting magnets. The absorbers are needed to avoid quenches, reduce the heat dissipation in the cold mass and prevent magnet failures due to long-term radiation damage. In this paper, we present FLUKA shower simulations assessing the shielding requirements for high-field magnets of a 10 TeV muon collider. We quantify in particular the role of synchrotron photon emission by decay electrons and positrons, which helps in dispersing the energy carried by the decay products. For comparison, selected results for a 3 TeV muon collider are also presented. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOST001 | |
| About • | Received ※ 08 June 2022 — Revised ※ 11 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 16 June 2022 | |
| Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPOST018 | Power Deposition Studies for Crystal-Based Heavy Ion Collimation in the LHC | 1726 |
| SUSPMF007 | use link to see paper's listing under its alternate paper code | |
|
||
| The LHC heavy-ion program with 208Pb82+ beams is foreseen to benefit from a significant intensity upgrade in 2022. A performance limitation may arise from ion fragments scattered out of the collimators in the betatron cleaning insertion, which risk quenching superconducting magnets during periods of short beam lifetime. In order to mitigate this risk, an alternative collimation technique, relying on bent crystals as primary collimators, will be used in future heavy-ion runs. In this paper, we study the power deposition in superconducting magnets by means of FLUKA shower simulations, comparing the standard collimation system against the crystal-based one. The studies focus on the dispersion suppressor regions downstream of the betatron cleaning insertion, where the ion fragment losses are the highest. Based on these studies, we quantify the expected quench margin expected in future runs with 208Pb82+ beams. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOST018 | |
| About • | Received ※ 08 June 2022 — Revised ※ 14 June 2022 — Accepted ※ 24 June 2022 — Issue date ※ 03 July 2022 | |
| Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPOST019 | Benchmarks of Energy Deposition Studies for Heavy-Ion Collimation Losses at the LHC | 1730 |
|
||
| During some periods in its second physics run (2015-2018), the LHC has been operated with 208Pb82+ ion beams at an energy of 6.37 ZTeV. The LHC is equipped with a betatron collimation system, which intercepts the transverse beam halo and protects sensitive equipment such as superconducting magnets against beam losses. However, hadronic fragmentation and electromagnetic dissociation of heavy ions in collimators generate off-rigidity particles, which can be lost in the downstream dispersion suppressor, putting the magnets at risk to quench. An accurate modelling of the beam-induced energy deposition in the collimation system and superconducting magnets is important for quantifying possible performance limitations arising from magnet quenches. In this paper, we compare FLUKA shower simulations against beam loss monitor measurements recorded during the 2018 208Pb82+ run. In particular, we investigate fast beam loss events, which lead to recurring beam aborts in 2018 operation. Based on these studies, we assess the ability of the simulation model to reproduce the observed loss patterns in the collimation region and dispersion suppressor. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOST019 | |
| About • | Received ※ 08 June 2022 — Revised ※ 10 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 23 June 2022 | |
| Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPOST026 | Conceptual Design of the FCC-ee Beam Dumping System | 1753 |
| SUSPMF002 | use link to see paper's listing under its alternate paper code | |
|
||
| The Future Circular electron-positron Collider (FCC-ee) will have stored beam energies of up to 20 MJ. This is a factor 100 higher than any current or past lepton collider. A safe and reliable disposal of the beam onto a beam dump block is therefore critical for operation. To ensure the survival of the dump core blocks, transversal dilution of the beam is necessary. To reduce the complexity of the system and guarantee high availability, an optimized, semi-passive beam dumping system has been designed. The main dump absorber design has been optimized following recent studies for high energy dump block materials for the LHC High Luminosity upgrade. First simulations regarding the radiation environment of the dumping system have been carried out, allowing the definition of preliminary constraints for the integration with respect to radiation sensitive equipment. The performance of the system has been evaluated using Monte-Carlo simulations as well as thermomechanical Finite-Element-Analysis to investigate potential material failure and assess safety margins. An experiment at the CERN HiRadMat facility has been carried out and preliminary results show good agreement with simulations. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOST026 | |
| About • | Received ※ 07 June 2022 — Revised ※ 16 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 25 June 2022 | |
| Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPOPT015 | Study of Hydrodynamic-Tunnelling Effects Induced by High-Energy Proton Beams in Graphite | 1870 |
|
||
| The design and assessment of machine-protection systems for existing and future high-energy accelerators comprises the study of accidental beam impact on machine elements. In case of a direct impact of a large number of high-energy particle bunches in one location, the damage range in the material is significantly increased due to an effect known as hydrodynamic tunnelling. The effect is caused by the beam-induced reduction of the material density along the beam trajectory, which allows subsequent bunches to penetrate deeper into the target. The assessment of the damage range requires the sequential coupling of an energy-deposition code, like FLUKA, and a hydrodynamic code, like Autodyn. The paper presents the simulations performed for the impact of the nominal LHC beam at 7 TeV on a graphite target. It describes the optimisation of the simulation setup and the required coupling workflow. The resulting energy deposition and the evolution of the target density are discussed. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOPT015 | |
| About • | Received ※ 20 May 2022 — Revised ※ 14 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 02 July 2022 | |
| Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPOPT063 | The FCCee Pre-Injector Complex | 2007 |
|
||
| The international FCC study group published in 2019 a Conceptual Design Report for an electron-positron collider with a centre-of-mass energy from 90 to 365 GeV with a beam currents of up to 1.4 A per beam. The high beam current of this collider create challenging requirements on the injection chain and all aspects of the linac need to be carefully reconsidered and revisited, including the injection time structure. The entire beam dynamics studies for the full linac, damping ring and transfer lines are major activities of the injector complex design. A key point is that any increase of positron production and capture efficiency reduces the cost and complexity of the driver linac, the heat and radiation load of the converter system, and increases the operational margin. In this paper we will give an overview of the status of the injector complex design and introduce the new layout that has been proposed by the study group working in the context of the CHART collaboration. In this framework, furthermore, we also present the preliminary studies of the FCC-ee positron source highlighting the main requirements and constraints. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOPT063 | |
| About • | Received ※ 11 June 2022 — Revised ※ 14 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 29 June 2022 | |
| Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPOTK018 | Simulation of Heavy-Ion Beam Losses with Crystal Collimation* | 2082 |
| SUSPMF048 | use link to see paper's listing under its alternate paper code | |
|
||
|
With the higher stored energy envisioned for future heavy-ion runs in the LHC and the challenging fragmentation aspect of heavy-ion beams due to interaction with collimator material, the need arises for even more performing collimation systems. One promising solution is crystal channeling, which is used in the HL-LHC baseline and starts with Run III for heavy-ion collimation. To investigate an optimal configuration for the collimation system, a well-tested simulation setup is required. This work shows the simulations of channeling and other coherent effects in the SixTrack-FLUKA Coupling simulation framework and compares simulated loss patterns with data from previous beam tests.
*Research supported by the HL’LHC project |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOTK018 | |
| About • | Received ※ 07 June 2022 — Accepted ※ 11 June 2022 — Issue date ※ 15 June 2022 | |
| Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPOTK048 | Radiation Load Studies for the FCC-ee Positron Source with a Superconducting Matching Device | 2879 |
| SUSPMF118 | use link to see paper's listing under its alternate paper code | |
|
||
| For an electron-positron collider like FCC-ee, the production of positrons plays a crucial role. One of the design options considered for the FCC-ee positron source employs a superconducting solenoid made of HTS coils as an adiabatic matching device. The solenoid, which is placed around the production target, is needed to capture positrons before they can be accelerated in a linear accelerator. A superconducting solenoid yields a higher peak field than a conventional-normal conducting magnetic flux concentrator, therefore increasing the achievable positron yield. In order to achieve an acceptable positron production, the considered target is made of tungsten-rhenium, which gives also a significant flux of un-wanted secondary particles, that in turn could generate a too large radiation load on the superconducting coils. In this study, we assess the feasibility of such a positron source by studying the heat load and long-term radiation damage in the superconducting matching device and surrounding structures. Results are presented for different geometric configurations of the superconducting matching device. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOTK048 | |
| About • | Received ※ 08 June 2022 — Revised ※ 15 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 07 July 2022 | |
| Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPOTK049 | Irradiation of Low-Z Carbon-Based Materials with 440 GeV/c Proton Beam for High Energy & Intensity Beam Absorbers: The CERN HiRadMat-56-HED Experiment | 2883 |
|
||
| The beam stored energy and the peak intensity of CERN Large Hadron Collider (LHC) will grow in the next few years. The former will increase from the 320 MJ values of Run2 (2015-2018) to almost 540 MJ during Run3 (2022 onwards) and 680 MJ during the HL-LHC era putting stringent requirements on beam intercepting devices, such as absorbers and dumps. The HiRadMat-56-HED (High-Energy Dumps) experiment performed in Autumn 2021 executed at CERN HiRadMat facility employed the Super Proton Synchrotron accelerator (SPS) 440 GeV/c proton beam to impact different low-density carbon-based materials targets to assess their performance to these higher energy beam conditions. The study focused on advanced grades of graphitic materials, including isostatic graphite, carbon-fiber reinforced carbon and carbon-SiC materials in addition to flexible expanded graphite. Some of them specifically tailored in collaboration with industry to very specific properties. The objectives of this experiment are: (i) to assess the performance of existing and potentially suitable advanced materials for the currently operating LHC beam dumps and (ii) to study alternative materials for the HL-LHC main dump or for the Future Circular Collider dump systems. The contribution will detail the R&D phase during design, the execution of the experiment, the pre-irradiation tests as well as the first post irradiation examination of the target materials. Lessons learnt and impact on operational devices will also be drawn. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOTK049 | |
| About • | Received ※ 03 June 2022 — Revised ※ 15 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 04 July 2022 | |
| Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPOTK052 | Muon Collider Graphite Target Studies and Demonstrator Layout Possibilities at CERN | 2895 |
|
||
| Muon colliders offer enormous potential for research of the particle physics frontier. Leptons can be accelerated without suffering large synchrotron radiation losses. The International Muon Collider Collaboration is considering 3 and 10 TeV (CM) machines for a conceptual stage. In the core of the Muon Collider facility lays a MW class production target, which will absorb a high power (1 and 3 MW) proton beam to produce muons via pion decay. The target must withstand high dynamic thermal loads induced by 2 ns pulses at 5-50 Hz. Also, operational reliability must be guaranteed to reduce target exchanges to a minimum. Several technologies for these systems are being studied in different laboratories. We present in this paper the results of a preliminary feasibility study of a graphite-based target, and the different layouts under study for a demonstrator target complex at CERN. Synergies with advanced nuclear systems are being explored for the development of a liquid metal target. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOTK052 | |
| About • | Received ※ 07 June 2022 — Revised ※ 14 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 18 June 2022 | |
| Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |