Paper | Title | Page |
---|---|---|
MOPOMS023 | Start-to-End Beam-Dynamics Simulations of a Compact C-Band Electron Beam Source for High Spectral Brilliance Applications | 687 |
|
||
Funding: This work is partially supported by DARPA under the Contract No. HR001120C0072, by DOE Contract DE-SC0009914, DOE Contract DE-SC0020409, and by the National Science Foundation Grant No. PHY-1549132. Proposals for new linear accelerator-based facilities are flourishing world-wide with the aim of high spectral brilliance radiation sources. Most of these accelerators are based on electron beams, with a variety of applications in industry, research and medicine such as colliders, free-electron lasers, wake-field accelerators, coherent THz and inverse Compton scattering X/’ sources as well as high-resolution diagnostics tools in biomedical science. In order to obtain high-quality electron beams in a small footprint, we present the optimization design of a C-band linear accelerator machine. Driven by a novel compact C-band hybrid photoinjector, it will yield ultra-short electron bunches of few 100’s pC directly from injection with ultra-low emittance, fraction of mm-mrad, and a few hundred fs length simultaneously, therefore satisfying full 6D emittance compensation. The normal-conducting linacs are based on a novel high-efficiency design with gradients up to 50 MV/m. The beam maximum energy can be easily adjusted in the mid-GeV’s range. In this paper, we discuss the start-to-end beam-dynamics simulations in details. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOMS023 | |
About • | Received ※ 07 June 2022 — Revised ※ 09 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 03 July 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
THPOPT036 | New Microwave Thermionic Electron Gun for APS Upgrade: Test Results and Operation Experience | 2665 |
|
||
Funding: This work was supported by the U.S. Department of Energy, Office of Basic Energy Science, under contracts DE-SC0015191 and DE- AC02-06CH11357 Recently, RadiaBeam has designed and built a robust thermionic RF gun with optimized electromagnetic per-formance, improved thermal engineering, and a robust cathode mounting technique. This gun allows to improve the performance of existing and future light sources, industrial accelerators, and electron beam driven te-rahertz sources. Unlike conventional electrically or side-coupled RF guns, this new gun operates in ’-mode with the help of magnetic coupling holes. Such a design al-lows operation at longer pulses and has negligible dipole and quadrupole components. The gun prototype was built, then installed and tested at the Advanced Photon Source (APS) injector. This paper presents the results of high power and beam tests of this RF gun, and operation-al experience at APS to this moment. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOPT036 | |
About • | Received ※ 31 May 2022 — Revised ※ 10 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 27 June 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
THPOPT037 | Ceramics Evaluation for MW-Power Coaxial Windows, Operating in UHF Frequency Range | 2668 |
|
||
Funding: This work was supported by the U.S. Department of Energy, Office of Basic Energy Science, under SBIR grant DE- SC0021552 Modern accelerator facilities require reliable high-power RF components. The RF vacuum window is a critical part of the waveguide couplers to the accelerating cavities. It is the point where the RF feed crosses the vacuum boundary and thus forms part of the confinement barrier. RF windows must be designed to have low power dissipation inside their ceramic, be resistant to mechanical stresses, and free of discharges. In this paper, we report on the evaluation of three different ceramic candidates for high power RF windows. These materials have low loss tangents, low secondary electron yield (SEY), and large thermal expansion coefficients. The acquired materials were inspected, coated, and measured to select the optimal set. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOPT037 | |
About • | Received ※ 01 June 2022 — Revised ※ 10 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 04 July 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |