IPAC2022 - List of Authors (Keintzel, J.)

Paper	Title	Page
MOPOPT047	Experimental Demonstration of Machine Learning Application in LHC Optics Commissioning	359
	E. Fol, F.S. Carlier, J. Dilly, M. Hofer, J. Keintzel, M. Le Garrec, E.H. Maclean, T.H.B. Persson, F. Soubelet, R. Tomás García, A. Wegscheider CERN, Meyrin, Switzerland J.F. Cardona UNAL, Bogota D.C, Colombia
	Recently, we conducted successful studies on the suitability of machine learning (ML) methods for optics measurements and corrections, incorporating novel ML-based methods for local optics corrections and reconstruction of optics functions. After performing extensive verifications on simulations and past measurement data, the newly developed techniques became operational in the LHC commissioning 2022. We present the experimental results obtained with the ML-based methods and discuss future improvements. Besides, we also report on improving the Beam Position Monitor (BPM) diagnostics with the help of the anomaly detection technique capable to identify malfunctioning BPMs along with their possible fault causes.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOPT047
About •	Received ※ 07 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 06 July 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUOZSP1	Prospects for Optics Measuements in FCC-ee	827
	J. Keintzel, R. Tomás García, F. Zimmermann CERN, Meyrin, Switzerland
	Within the framework of the Future Circular Collider Feasibility Study, the design of the electron-positron collider FCC-ee is optimised, as a possible future double collider ring, currently foreseen to start operation during the 2040s. With close to 100 km of circumference and strong synchrotron radiation damping at highest beam energy, adequate beam measurements are needed to control the optics at the desired level. Various possible techniques to measure the optics in FCC-ee are explored, including the option of turn-by-turn measurements in combination with an AC-dipole.
	Slides TUOZSP1 [2.738 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUOZSP1
About •	Received ※ 08 June 2022 — Revised ※ 13 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 28 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOST007	Centre-of-Mass Energy in FCC-ee	1683
	J. Keintzel, R. Tomás García, F. Zimmermann CERN, Meyrin, Switzerland A.P. Blondel DPNC, Genève, Switzerland D.N. Shatilov BINP SB RAS, Novosibirsk, Russia
	The Future Circular electron-positron Collider (FCC-ee) is designed for high precision particle physics experiments. This demands a precise knowledge of the beam energies, obtained by resonant depolarization, and from which the center-of-mass energy and possible boosts at all interaction points are then determined. At the highest beam energy mode of 182.5 GeV, the energy loss due to synchrotron radiation is about 10 GeV per revolution. Hence, not only the location of the RF cavities, but also a precise control of the optics and understanding of beam dynamics, are crucial. In the studies presented here, different possible locations of the RF-cavities are considered, when calculating the beam energies over the machine circumference, including energy losses from crossing angles, a non-homogeneous dipole distribution, and an estimate of the beamstrahlung effect at the collision point.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOST007
About •	Received ※ 08 June 2022 — Revised ※ 17 June 2022 — Accepted ※ 24 June 2022 — Issue date ※ 27 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOST008	Optics Correction Strategy for Run 3 of the LHC	1687
	T.H.B. Persson, F.S. Carlier, A. Costa Ojeda, J. Dilly, V. Ferrentino, E. Fol, H. García Morales, M. Hofer, E.J. Høydalsvik, J. Keintzel, M. Le Garrec, E.H. Maclean, L. Malina, F. Soubelet, R. Tomás García, A. Wegscheider, L. van Riesen-Haupt CERN, Meyrin, Switzerland J.F. Cardona UNAL, Bogota D.C, Colombia
	After almost 4 years of shutdown the LHC is again operational in 2022. Experience from the previous Long Shutdown (LS) has shown that the local errors around the triplet magnets changed significantly and it is likely we will again see different errors in 2022. In the LHC there is an interplay between the linear and the nonlinear correction which can make the corrections difficult and time-consuming to find. In this article, we describe the measurements and corrections performed during the commissioning in 2022 in order to control both the linear and the nonlinear optics to high precision.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOST008
About •	Received ※ 08 June 2022 — Revised ※ 25 June 2022 — Accepted ※ 04 July 2022 — Issue date ※ 10 July 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Experimental Demonstration of Machine Learning Application in LHC Optics Commissioning

359

E. Fol, F.S. Carlier, J. Dilly, M. Hofer, J. Keintzel, M. Le Garrec, E.H. Maclean, T.H.B. Persson, F. Soubelet, R. Tomás García, A. Wegscheider
CERN, Meyrin, Switzerland
J.F. Cardona
UNAL, Bogota D.C, Colombia

Recently, we conducted successful studies on the suitability of machine learning (ML) methods for optics measurements and corrections, incorporating novel ML-based methods for local optics corrections and reconstruction of optics functions. After performing extensive verifications on simulations and past measurement data, the newly developed techniques became operational in the LHC commissioning 2022. We present the experimental results obtained with the ML-based methods and discuss future improvements. Besides, we also report on improving the Beam Position Monitor (BPM) diagnostics with the help of the anomaly detection technique capable to identify malfunctioning BPMs along with their possible fault causes.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOPT047

About •

Received ※ 07 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 06 July 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUOZSP1

Prospects for Optics Measuements in FCC-ee

827

J. Keintzel, R. Tomás García, F. Zimmermann
CERN, Meyrin, Switzerland

Within the framework of the Future Circular Collider Feasibility Study, the design of the electron-positron collider FCC-ee is optimised, as a possible future double collider ring, currently foreseen to start operation during the 2040s. With close to 100 km of circumference and strong synchrotron radiation damping at highest beam energy, adequate beam measurements are needed to control the optics at the desired level. Various possible techniques to measure the optics in FCC-ee are explored, including the option of turn-by-turn measurements in combination with an AC-dipole.

Slides TUOZSP1 [2.738 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUOZSP1

About •

Received ※ 08 June 2022 — Revised ※ 13 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 28 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOST007

Centre-of-Mass Energy in FCC-ee

1683

J. Keintzel, R. Tomás García, F. Zimmermann
CERN, Meyrin, Switzerland
A.P. Blondel
DPNC, Genève, Switzerland
D.N. Shatilov
BINP SB RAS, Novosibirsk, Russia

The Future Circular electron-positron Collider (FCC-ee) is designed for high precision particle physics experiments. This demands a precise knowledge of the beam energies, obtained by resonant depolarization, and from which the center-of-mass energy and possible boosts at all interaction points are then determined. At the highest beam energy mode of 182.5 GeV, the energy loss due to synchrotron radiation is about 10 GeV per revolution. Hence, not only the location of the RF cavities, but also a precise control of the optics and understanding of beam dynamics, are crucial. In the studies presented here, different possible locations of the RF-cavities are considered, when calculating the beam energies over the machine circumference, including energy losses from crossing angles, a non-homogeneous dipole distribution, and an estimate of the beamstrahlung effect at the collision point.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOST007

About •

Received ※ 08 June 2022 — Revised ※ 17 June 2022 — Accepted ※ 24 June 2022 — Issue date ※ 27 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOST008

Optics Correction Strategy for Run 3 of the LHC

1687

T.H.B. Persson, F.S. Carlier, A. Costa Ojeda, J. Dilly, V. Ferrentino, E. Fol, H. García Morales, M. Hofer, E.J. Høydalsvik, J. Keintzel, M. Le Garrec, E.H. Maclean, L. Malina, F. Soubelet, R. Tomás García, A. Wegscheider, L. van Riesen-Haupt
CERN, Meyrin, Switzerland
J.F. Cardona
UNAL, Bogota D.C, Colombia

After almost 4 years of shutdown the LHC is again operational in 2022. Experience from the previous Long Shutdown (LS) has shown that the local errors around the triplet magnets changed significantly and it is likely we will again see different errors in 2022. In the LHC there is an interplay between the linear and the nonlinear correction which can make the corrections difficult and time-consuming to find. In this article, we describe the measurements and corrections performed during the commissioning in 2022 in order to control both the linear and the nonlinear optics to high precision.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOST008

About •

Received ※ 08 June 2022 — Revised ※ 25 June 2022 — Accepted ※ 04 July 2022 — Issue date ※ 10 July 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)