Paper |
Title |
Page |
THOYSP1 |
Construction and Measurement of a Tuneable Permanent Magnet Quadrupole for Diamond Light Source |
2424 |
|
- A.R. Bainbridge, B.J.A. Shepherd
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
- A.G. Hinton, N. Krumpa
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
- I.P.S. Martin, W. Tizzano
DLS, Oxfordshire, United Kingdom
|
|
|
Permanent magnets (PMs) are becoming an attractive proposition as a green and efficient replacement for electromagnets in particle accelerators. The Zero-Power Tuneable Optics (ZEPTO) collaboration between STFC and CERN has demonstrated that traditional limitations of PM technology, such as the ability to change the flux density in the magnet aperture, can be overcome. Moving PM blocks relative to fixed steel structures that define the field, the strength may be changed while suitable field homogeneity is maintained. A new ZEPTO variant has been developed in conjunction with Diamond Light Source (DLS) to demonstrate the technology on a real accelerator. This magnet features a number of crucial design innovations over previous generations of ZEPTO magnets that improve the convenience and versatility of PM systems and demonstrate that they can be deployed in many situations. We present the construction and measurement results of this new magnet and outline the planned data collection whilst installed on DLS. We analyse its performance relative to design and discuss the new features with focus on the real-world implications of PM technology for current and future accelerators.
|
|
|
Slides THOYSP1 [3.675 MB]
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2022-THOYSP1
|
|
About • |
Received ※ 30 May 2022 — Revised ※ 09 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 27 June 2022 |
Cite • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
THPOTK009 |
Design of a Permanent Magnet Based Dipole Quadrupole Magnet |
2784 |
|
- A.G. Hinton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
- M. Kokole, T. Milharčič
KYMA, Trieste, Italy
- A. Shahveh
DLS, Oxfordshire, United Kingdom
- B.J.A. Shepherd
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
- B.J.A. Shepherd
Cockcroft Institute, Warrington, Cheshire, United Kingdom
|
|
|
Permanent magnet technology can facilitate the design of accelerator magnets with much lower power consumption than traditional resistive electromagnets. By reducing the power requirements of magnets, more sustainable accelerators can be designed and built. At STFC, as part of the I.FAST collaboration, we are working to develop sustainable technologies for future accelerators. As part of this work, we have designed a permanent magnet based dipole-quadrupole magnet with parameters suited to meet the requirements of the proposed Diamond-II upgrade. We present here the magnetic design of the dipole-quadrupole magnet. The design, based on a single sided dipole-quadrupole, uses permanent magnets to generate the field in the magnet bore. The design includes the shaping of the pole tips to reduce multipole errors as well as methods of providing thermal stabilisation using thermal shunts and field tuning using resistive coils. The mechanical design of the magnet is being undertaken by colleagues at Kyma and a prototype of the magnet will soon be built and tested.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2022-THPOTK009
|
|
About • |
Received ※ 06 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 06 July 2022 |
|
Cite • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
THPOTK010 |
Development of a Short Period Superconducting Helical Undulator |
2788 |
|
- A.G. Hinton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
- J. Boehm, L. Cooper, B. Green, T. Hayler, P. Jeffery, C.P. Macwaters, B.J.S. Matthews
STFC/RAL, Chilton, Didcot, Oxon, United Kingdom
- S. Milward
DLS, Oxfordshire, United Kingdom
- B.J.A. Shepherd, N. Thompson
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
|
|
|
Superconducting technology provides the possibility to develop short period, small bore undulators that can generate much larger magnetic fields than alternative technologies. This may allow an XFEL with optimised superconducting undulators to cover a broader range of wavelengths than traditional undulators. At STFC, we have undertaken work to design and build a prototype superconducting helical undulator module with parameters suitable for use on a future XFEL facility. This work includes the design of an undulator with 13 mm period and 5 mm magnetic gap, as well as the supporting cryogenic and vacuum systems required for operation. We present here the updated design of the superconducting helical undulator that represents the results of prototyping work. Improved methods for manufacturing the undulator former and winding the superconducting wire have been developed. The measured mechanical tolerances and the impact on the field quality will be presented. The fields produced by prototype undulators will soon be measured using a Hall probe system.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2022-THPOTK010
|
|
About • |
Received ※ 06 June 2022 — Accepted ※ 10 June 2022 — Issue date ※ 17 June 2022 |
|
Cite • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|