IPAC2022 - List of Authors (Chaisueb, N.)

Paper	Title	Page
MOPOPT029	Longitudinal Phase Space Benchmarking for PITZ Bunch Compressor	310
	A. Lueangaramwong, Z. Aboulbanine, G.D. Adhikari, N. Aftab, P. Boonpornprasert, G.Z. Georgiev, J. Good, M. Groß, C. Koschitzki, M. Krasilnikov, X.-K. Li, O. Lishilin, D. Melkumyan, H.J. Qian, G. Shu, F. Stephan, G. Vashchenko, T. Weilbach DESY Zeuthen, Zeuthen, Germany N. Chaisueb Chiang Mai University, Chiang Mai, Thailand
	The longitudinal phase space characteristics of space-charge dominated electron beams are keys to achieving bunch compression for the accelerator-based THz source at the Photo Injector Test facility at DESY in Zeuthen (PITZ). Such a THz source is proposed as a prototype for an accelerator-based THz source for pump-probe experiments at the European XFEL. A start-to-end simulation has suggested the settings of the phase of booster linear accelerator manipulating longitudinal beam characteristics to optimize the performance of the THz FEL. Although beam diagnostics after compression at PITZ are limited, the longitudinal beam characteristics as a function of the booster phase have been measured and compared with the corresponding simulations. The benchmark involves measurements of longitudinal phase space distribution for bunch charges up to 2 nC. The measurement technique assigned uses 50-um slits to achieve higher momentum and time resolution (1.8 keV/c and 0.5 ps, respectively).
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOPT029
About •	Received ※ 07 June 2022 — Revised ※ 10 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 18 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOPT027	Numerical Simulation of a Superradiant THz Source at the PITZ Facility	1063
	N. Chaisueb, S. Rimjaem Chiang Mai University, Chiang Mai, Thailand P. Boonpornprasert, M. Krasilnikov, X.-K. Li, A. Lueangaramwong DESY Zeuthen, Zeuthen, Germany S. Rimjaem ThEP Center, Commission on Higher Education, Bangkok, Thailand
	An accelerator-based THz source is under development at the Photo Injector Test Facility at DESY in Zeuthen (PITZ). The facility can produce high brightness electron beams with high charge and small emittance. Currently, a study on development of a tunable high-power THz SASE FEL for supporting THz-pump, X-ray-probe experiments at the European XFEL is underway. An LCLS-I undulator, a magnetic chicane bunch compressor, and THz pulse diagnostics have been installed downstream the previously existing setup of the PITZ beamline. Additional to the SASE FEL, a possibility to generate superradiant THz undulator radiation from short electron bunches is under investigation, which is the focus in this study. Numerical simulations of the superradiant THz radiation by using sub-picosecond electron bunches with energy of 6 - 22 MeV and bunch charge up to 2 nC produced from the PITZ accelerator are performed. The results show that the radiation with a spectral range of 0.5 to 9 THz and a pulse energy in the order of sub-uJ can be obtained. The results from this study can be used as a benchmark for the future development.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOPT027
About •	Received ※ 08 June 2022 — Revised ※ 13 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 07 July 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOPT028	THz Undulator Radiation Based on Super-Radiant Technique at Chiang Mai University	1067
	E. Kongmon IST, Chiang Mai, Thailand N. Chaisueb, S. Rimjaem Chiang Mai University, Chiang Mai, Thailand S. Rimjaem ThEP Center, Commission on Higher Education, Bangkok, Thailand
	A linear accelerator system at the PBP-CMU Electron Linac Laboratory is used as an electron source for generating coherent THz radiation and MIR-FEL. To achieve high power THz radiation, the super-radiant technique using pre-bunched electrons and undulator magnet is utilized. In this study, we investigate the generation of such radiation with comparable properties as the FEL. The beamline composes of a 180-degree magnetic bunch compressor, a 2 m-electromagnet undulator, quadrupole magnets and diagnostic devices. This work includes the undulator design and investigation on properties of electron beam and THz radiation. Based-on the results of beam dynamic study, the optimized electron beams have an energy in a range of 10^-16 MeV, a bunch charge of 100 pC, and a bunch length of 300 fs. The radiation with frequency covering from 0.5 to 3 THz yields a peak power of 5.21 MW at 1.15 THz. This information was used as an initial parameter for undulator design by using the CST-EM Studio software. It has 19.5 periods with a period length of 100 mm. The design results show that the maximum magnetic field is 0.2317 T. The results of this study are used as the guideline for construction of the undulator and the THz-FEL beamline.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOPT028
About •	Received ※ 08 June 2022 — Revised ※ 11 June 2022 — Accepted ※ 13 June 2022 — Issue date ※ 27 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOPT029	Infrared Free-Electron Laser Project in Thailand	1070
	S. Rimjaem, N. Chaisueb, P. Kitisri, K. Kongmali, E. Kongmon, P. Nanthanasit, S. Pakluea, J. Saisut, S. Sukara, K. Techakaew, C. Thongbai Chiang Mai University, Chiang Mai, Thailand P. Apiwattanakul, P. Jaikaew, W. Jaikla, N. Kangrang Chiang Mai University, PBP Research Facility, Chiang Mai, Thailand M. Jitvisate Suranaree University of Technology, Nakhon Ratchasima, Thailand M.W. Rhodes ThEP Center, Commission on Higher Education, Bangkok, Thailand
	The infrared free-electron laser (IR FEL) project is established at Chiang Mai University in Thailand with the aim to provide experimental stations for users utilizing accelerator-based terahertz (THz) and mid-infrared (MIR) radiation. Main components of the system include a thermionic RF gun, an alpha magnet as a bunch compressor and energy filter, a standing-wave RF linac, a THz transition radiation (THz-TR) station, two magnetic bunch compressors and beamlines for MIR/THz FEL. The system commissioning is ongoing to produce the beams with proper properties. Simulation results suggest that the oscillator MIR-FEL with wavelengths of 9.5-16.6 um and pulse energies of 0.15-0.4 uJ can be produced from 60-pC electron bunches with energy of 20-25 MeV. The super-radiant THz-FEL with frequencies of 1-3 THz and 700 kW peak power can be produced from 10^-16 MeV electron bunches with a charge of 50 pC and a length of 200-300 fs. Furthermore, the THz-TR with a spectral range of 0.3-2.5 THz and a pulse power of up to 1.5 MW can be obtained. The MIR/THz FEL will be used as high-brightness light source for pump-probe experiments, while the coherent THz-TR will be used in time-domain spectroscopy.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOPT029
About •	Received ※ 08 June 2022 — Revised ※ 12 June 2022 — Accepted ※ 13 June 2022 — Issue date ※ 16 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Longitudinal Phase Space Benchmarking for PITZ Bunch Compressor

310

A. Lueangaramwong, Z. Aboulbanine, G.D. Adhikari, N. Aftab, P. Boonpornprasert, G.Z. Georgiev, J. Good, M. Groß, C. Koschitzki, M. Krasilnikov, X.-K. Li, O. Lishilin, D. Melkumyan, H.J. Qian, G. Shu, F. Stephan, G. Vashchenko, T. Weilbach
DESY Zeuthen, Zeuthen, Germany
N. Chaisueb
Chiang Mai University, Chiang Mai, Thailand

The longitudinal phase space characteristics of space-charge dominated electron beams are keys to achieving bunch compression for the accelerator-based THz source at the Photo Injector Test facility at DESY in Zeuthen (PITZ). Such a THz source is proposed as a prototype for an accelerator-based THz source for pump-probe experiments at the European XFEL. A start-to-end simulation has suggested the settings of the phase of booster linear accelerator manipulating longitudinal beam characteristics to optimize the performance of the THz FEL. Although beam diagnostics after compression at PITZ are limited, the longitudinal beam characteristics as a function of the booster phase have been measured and compared with the corresponding simulations. The benchmark involves measurements of longitudinal phase space distribution for bunch charges up to 2 nC. The measurement technique assigned uses 50-um slits to achieve higher momentum and time resolution (1.8 keV/c and 0.5 ps, respectively).

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOPT029

About •

Received ※ 07 June 2022 — Revised ※ 10 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 18 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOPT027

Numerical Simulation of a Superradiant THz Source at the PITZ Facility

1063

N. Chaisueb, S. Rimjaem
Chiang Mai University, Chiang Mai, Thailand
P. Boonpornprasert, M. Krasilnikov, X.-K. Li, A. Lueangaramwong
DESY Zeuthen, Zeuthen, Germany
S. Rimjaem
ThEP Center, Commission on Higher Education, Bangkok, Thailand

An accelerator-based THz source is under development at the Photo Injector Test Facility at DESY in Zeuthen (PITZ). The facility can produce high brightness electron beams with high charge and small emittance. Currently, a study on development of a tunable high-power THz SASE FEL for supporting THz-pump, X-ray-probe experiments at the European XFEL is underway. An LCLS-I undulator, a magnetic chicane bunch compressor, and THz pulse diagnostics have been installed downstream the previously existing setup of the PITZ beamline. Additional to the SASE FEL, a possibility to generate superradiant THz undulator radiation from short electron bunches is under investigation, which is the focus in this study. Numerical simulations of the superradiant THz radiation by using sub-picosecond electron bunches with energy of 6 - 22 MeV and bunch charge up to 2 nC produced from the PITZ accelerator are performed. The results show that the radiation with a spectral range of 0.5 to 9 THz and a pulse energy in the order of sub-uJ can be obtained. The results from this study can be used as a benchmark for the future development.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOPT027

About •

Received ※ 08 June 2022 — Revised ※ 13 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 07 July 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOPT028

THz Undulator Radiation Based on Super-Radiant Technique at Chiang Mai University

1067

E. Kongmon
IST, Chiang Mai, Thailand
N. Chaisueb, S. Rimjaem
Chiang Mai University, Chiang Mai, Thailand
S. Rimjaem
ThEP Center, Commission on Higher Education, Bangkok, Thailand

A linear accelerator system at the PBP-CMU Electron Linac Laboratory is used as an electron source for generating coherent THz radiation and MIR-FEL. To achieve high power THz radiation, the super-radiant technique using pre-bunched electrons and undulator magnet is utilized. In this study, we investigate the generation of such radiation with comparable properties as the FEL. The beamline composes of a 180-degree magnetic bunch compressor, a 2 m-electromagnet undulator, quadrupole magnets and diagnostic devices. This work includes the undulator design and investigation on properties of electron beam and THz radiation. Based-on the results of beam dynamic study, the optimized electron beams have an energy in a range of 10^-16 MeV, a bunch charge of 100 pC, and a bunch length of 300 fs. The radiation with frequency covering from 0.5 to 3 THz yields a peak power of 5.21 MW at 1.15 THz. This information was used as an initial parameter for undulator design by using the CST-EM Studio software. It has 19.5 periods with a period length of 100 mm. The design results show that the maximum magnetic field is 0.2317 T. The results of this study are used as the guideline for construction of the undulator and the THz-FEL beamline.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOPT028

About •

Received ※ 08 June 2022 — Revised ※ 11 June 2022 — Accepted ※ 13 June 2022 — Issue date ※ 27 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOPT029

Infrared Free-Electron Laser Project in Thailand

1070

S. Rimjaem, N. Chaisueb, P. Kitisri, K. Kongmali, E. Kongmon, P. Nanthanasit, S. Pakluea, J. Saisut, S. Sukara, K. Techakaew, C. Thongbai
Chiang Mai University, Chiang Mai, Thailand
P. Apiwattanakul, P. Jaikaew, W. Jaikla, N. Kangrang
Chiang Mai University, PBP Research Facility, Chiang Mai, Thailand
M. Jitvisate
Suranaree University of Technology, Nakhon Ratchasima, Thailand
M.W. Rhodes
ThEP Center, Commission on Higher Education, Bangkok, Thailand

The infrared free-electron laser (IR FEL) project is established at Chiang Mai University in Thailand with the aim to provide experimental stations for users utilizing accelerator-based terahertz (THz) and mid-infrared (MIR) radiation. Main components of the system include a thermionic RF gun, an alpha magnet as a bunch compressor and energy filter, a standing-wave RF linac, a THz transition radiation (THz-TR) station, two magnetic bunch compressors and beamlines for MIR/THz FEL. The system commissioning is ongoing to produce the beams with proper properties. Simulation results suggest that the oscillator MIR-FEL with wavelengths of 9.5-16.6 um and pulse energies of 0.15-0.4 uJ can be produced from 60-pC electron bunches with energy of 20-25 MeV. The super-radiant THz-FEL with frequencies of 1-3 THz and 700 kW peak power can be produced from 10^-16 MeV electron bunches with a charge of 50 pC and a length of 200-300 fs. Furthermore, the THz-TR with a spectral range of 0.3-2.5 THz and a pulse power of up to 1.5 MW can be obtained. The MIR/THz FEL will be used as high-brightness light source for pump-probe experiments, while the coherent THz-TR will be used in time-domain spectroscopy.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOPT029

About •

Received ※ 08 June 2022 — Revised ※ 12 June 2022 — Accepted ※ 13 June 2022 — Issue date ※ 16 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)