Paper |
Title |
Page |
MOPOPT003 |
Studying Instabilities in the Canadian Light Source Storage Ring Using the Transverse Feedback System |
230 |
SUSPMF081 |
|
|
- S.J. Martens
University of Saskatchewan, Saskatoon, Canada
- D. Bertwistle, M.J. Boland
CLS, Saskatoon, Saskatchewan, Canada
- P. Hartmann
DELTA, Dortmund, Germany
|
|
|
The Transverse Feedback system at the Canadian Light Source can identify, categorize, and mitigate against periodic instabilities that arise in the storage ring beam. By quickly opening and closing the feedback loop, previously mitigated instabilities will be allowed to grow briefly before being damped by the system. The resulting growth in the beam oscillation amplitude curve can be analyzed to determine growth/damp rates and modes of the coupled bunch oscillations. Further measurements can be collected via active excitement of modes rather than passive growth. These Grow/damp and Excite/Damp curves have been collected and analyzed for various storage ring beam properties, including beam energy, machine chromaticity, and in-vacuum insertion device gap widths.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOPT003
|
|
About • |
Received ※ 08 June 2022 — Revised ※ 14 June 2022 — Accepted ※ 15 June 2022 — Issue date ※ 09 July 2022 |
Cite • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
TUPOMS003 |
CLS Operational Status and Future Operational Plans |
1389 |
|
- M.J. Boland, F. Le Pimpec
CLS, Saskatoon, Saskatchewan, Canada
|
|
|
The Canadian Light Source (CLS) has been in operation for users since 2005 and recently commissioned the 22nd photon beamline. In 2021 the CLS commenced top-up operations at 220 mA, which has been a big success for the user experiments. The storage ring is now RF power limited and will require a second RF cavity to realise the design goal of 500 mA. The 250 MeV electron injector complex for the CLS booster synchrotron ring dates back to the original linac from 1962 and the Saskatchewan Accelerator Laboratory. This paper will give an overview of the present status of the accelerator systems for user operations and the operational improvement plans for a second RF cavity in the storage ring and a new linac.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOMS003
|
|
About • |
Received ※ 16 June 2022 — Revised ※ 18 June 2022 — Accepted ※ 23 June 2022 — Issue date ※ 28 June 2022 |
Cite • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
WEPOST011 |
Studies on Top-Up Injection into the FCC-ee Collider Ring |
1699 |
SUSPMF006 |
|
|
- P.J. Hunchak, M.J. Boland
CLS, Saskatoon, Saskatchewan, Canada
- M. Aiba
PSI, Villigen PSI, Switzerland
- W. Bartmann, Y. Dutheil, M. Hofer, R.L. Ramjiawan, F. Zimmermann
CERN, Meyrin, Switzerland
- M.J. Boland
University of Saskatchewan, Saskatoon, Canada
|
|
|
In order to maximize the luminosity production time in the FCC-ee, top-up injection will be employed. The positron and electron beams will be accelerated to the collision energy in the booster ring before being injected with either a small transverse or longitudinal separation to the stored beam. Using this scheme essentially keeps the beam current constant and, apart from a brief period during the injection process, collision data can be continuously acquired. Two top-up injection schemes, each with on- and off-momentum sub-schemes, viable for FCC-ee have been identified in the past and are studied in further detail to find a suitable design for each of the four operation modes of the FCC-ee. In this paper, injection straight optics, initial injection tracking studies and the effect on the stored beam are presented. Additionally, a basic proxy error lattice is introduced as a first step to studying injection into an imperfect machine.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOST011
|
|
About • |
Received ※ 08 June 2022 — Revised ※ 13 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 19 June 2022 |
Cite • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
THPOPT020 |
Status and Plans for the New CLS Electron Source Lab |
2614 |
|
- M.J. Boland, D. Bertwistle, F. Le Pimpec
CLS, Saskatoon, Saskatchewan, Canada
- X.F.D. Stragier
TUE, Eindhoven, The Netherlands
|
|
|
The Canadian Light Source (CLS) has recently created a new Electron Source Lab (ESL) that can run independently from user operations. A section of the old Saskatchewan Accelerator Laboratory experimental nuclear physics tunnels has been rebuilt with new shielding and a separate entrance. The laboratory will be used to prepare an operational spare electron gun for the 250 MeV linac. In addition, there are plans to develop RF guns for a future branch line to inject into the linac and for possible short pulse production. This paper will give an overview of the ESL space and the first electron guns which plan to be installed.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2022-THPOPT020
|
|
About • |
Received ※ 16 June 2022 — Revised ※ 29 June 2022 — Accepted ※ 04 July 2022 — Issue date ※ 08 July 2022 |
Cite • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|