Author: Benedetti, G.
Paper Title Page
TUPOMS027 ALBA II Acelerator Upgrade Project 1467
 
  • F. Pérez, I. Bellafont, G. Benedetti, J. Campmany, M. Carlà, J.J. Casas, C. Colldelram, F.F.B. Fernández, J.C. Giraldo, T.F. Günzel, U. Iriso, J. Marcos, Z. Martí, V. Massana, R. Muñoz Horta, M. Pont, L. Ribó, P. Solans, L. Torino
    ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
 
  ALBA is working on the upgrade project that shall transform the actual storage ring, in operation since 2012, into a 4th generation light source, in which the soft X-rays part of the spectrum shall be diffraction limited. The project has been officially launched in 2021 and a White Paper presenting the main concepts of the upgrade has been published in Spring 2022. The storage ring upgrade is based on a 6BA lattice which has to comply with several constraints imposed by the decision of maintaining the same circumference (269 m), the same number of cells (16), the same beam energy (3 GeV), and as many of the source points as possible unperturbed. The lattice optimization has achieved an emittance of 140 pm.rad, which is a factor 30 smaller than that of the existing ring, but with an array compactness that presents technological challenges for the magnets, vacuum, diagnostics, RF systems and injection elements designs that are being investigated through an intensive R&D program.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOMS027  
About • Received ※ 06 June 2022 — Revised ※ 10 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 23 June 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEOZSP4 Full Coupling Studies at ALBA 1667
 
  • Z. Martí, G. Benedetti, M. Carlà, U. Iriso, L. Torino
    ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
 
  As other low emittance machine upgrades ALBA-II proposal considers operating in full coupling. In such configuration the horizontal emittance is further reduced while the lifetime is increased at the price of working close to equal fractional tunes. This mode of operation has not been adopted by any existing light source to date, and it presents a few disadvantages, like the optics degradation, injection efficiency reduction and beam size stability. In this paper the above mentioned difficulties are studied for the present ALBA storage ring in full coupling conditions.  
slides icon Slides WEOZSP4 [1.694 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEOZSP4  
About • Received ※ 07 June 2022 — Revised ※ 14 June 2022 — Accepted ※ 15 June 2022 — Issue date ※ 22 June 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPOPT047 A Double Dipole Kicker for Off and On-Axis Injection for ALBA-II 2701
 
  • G. Benedetti, M. Carlà, M. Pont
    ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
 
  Injection into the ALBA-II storage ring will be performed off-axis in a 4 meters straight section with a single multipole kicker. We present a novel topology for the coils of the injection kicker, named double dipole kicker (DDK). The resulting magnetic field is the superposition of two opposite dipoles, generated by four inner and four outer conductor rods. When the eight rods are powered, the dipole term cancels and the remaining multipole field is used for off-axis injection. Alternatively, when the four inner rods are switched off, an almost pure dipole is produced, that is useful for on-axis injection during the commissioning. A prototype of DDK is presently under design to be installed and tested in the existing ALBA storage ring. The positioning of the rods is calculated in order to maximise the kick efficiency in mrad/kA and minimise the disturbance to the orbit and the emittance of the stored beam. A metallic coating with optimised thickness along the inner ceramic vacuum chamber should provide compensation for the eddy currents induced field in order to minimize the disturbance to the stored beam while ensuring sufficiently low heat dissipation by the beam image currents.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOPT047  
About • Received ※ 16 May 2022 — Revised ※ 10 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 20 June 2022
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)