IPAC2022 - List of Authors (Baader, J.E.)

Paper	Title	Page
THPOPT031	SUNDAE1: A Liquid Helium Vertical Test-Stand for 2m Long Superconducting Undulator Coils	2646
	B. Marchetti, S. Abeghyan, J.E. Baader, S. Casalbuoni, M. Di Felice, U. Englisch, V. Grattoni, D. La Civita, M. Vannoni, M. Yakopov, P. Ziolkowski EuXFEL, Schenefeld, Germany S. Barbanotti, H.-J. Eckoldt, A. Hauberg, K. Jensch, S. Lederer, L. Lilje, R. Ramalingam, T. Schnautz, R. Zimmermann DESY, Hamburg, Germany A.W. Grau KIT, Karlsruhe, Germany
	Superconducting Undulators (SCUs) can produce higher photon flux and cover a wider photon energy range compared to permanent magnet undulators (PMUs) with the same vacuum gap and period length. To build the know-how to implement superconducting undulators for future upgrades of the European XFEL facility, two magnetic measurement test stands named SUNDAE 1 and 2 (Superconducting UNDulAtor Experiment) are being developed. SUNDAE1 will facilitate research and development on magnet design thanks to the possibility of training new SCU coils and characterizing their magnetic field. The experimental setup will allow the characterization of magnets up to 2m in length. These magnets will be immersed in a Helium bath at 2K or 4K temperature. In this article, we describe the experimental setup and highlight its expected performances.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOPT031
About •	Received ※ 03 June 2022 — Revised ※ 17 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 17 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOPT032	SUNDAE2 at EuXFEL: A Test Stand to Characterize the Magnetic Field of Superconducting Undulators	2649
	J.E. Baader, S. Abeghyan, S. Casalbuoni, D. La Civita, B. Marchetti, M. Yakopov, P. Ziolkowski EuXFEL, Schenefeld, Germany H.-J. Eckoldt, A. Hauberg, S. Lederer, L. Lilje, T. Wohlenberg, R. Zimmermann DESY, Hamburg, Germany A.W. Grau KIT, Eggenstein-Leopoldshafen, Germany
	European XFEL foresees a superconducting undulator (SCU) afterburner in the SASE2 hard X-ray beamline. It consists of six 5m-long undulator modules with a 5mm vacuum gap, where each module contains two 2m-long coils and one phase shifter. Prior to installation, the magnetic field must be mapped appropriately. Two magnetic measurement test stands named SUNDAE 1 and 2 (Superconducting UNDulAtor Experiment) are being developed at European XFEL. While SUNDAE1 will be a vertical test stand to measure SCU coils up to two meters with Hall probes in a liquid or superfluid helium bath, SUNDAE2 will measure the SCU coils assembled in the final cryostat. This contribution presents the development status of SUNDAE2 and its main requirements.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOPT032
About •	Received ※ 07 June 2022 — Revised ※ 13 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 28 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOPT061	European XFEL Undulators - Status and Plans	2737
	S. Casalbuoni, S. Abeghyan, J.E. Baader, U. Englisch, V. Grattoni, S. Karabekyan, B. Marchetti, H. Sinn, F. Wolff-Fabris, M. Yakopov, P. Ziolkowski EuXFEL, Schenefeld, Germany
	European XFEL has three undulator lines based on permanent magnet technology: two for hard and one for soft X-rays. The planar undulators can be tuned to cover the acceptance in terms of photon beam energy of the respective photon beamlines: 3.6-25 keV (SASE1/2) and 0.25-3 keV (SASE3) by changing the electron energy range between 11.5 GeV and 17.5 GeV and/or the undulator gap. In order to obtain different polarization modes, as required by the soft X-ray beamlines, a helical afterburner consisting of four APPLE X undulators designed by PSI has been installed at the downstream end of the present SASE3 undulator system. The European XFEL plans to develop the technology of superconducting undulators, which is of strategic importance for the facility upgrade. In order to extend the energy range above 30 keV a superconducting undulator afterburner is foreseen to be installed at the end of SASE2. This contribution presents the current status and the planned upgrades of the undulator lines at European XFEL.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOPT061
About •	Received ※ 07 June 2022 — Revised ※ 11 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 04 July 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

SUNDAE1: A Liquid Helium Vertical Test-Stand for 2m Long Superconducting Undulator Coils

2646

B. Marchetti, S. Abeghyan, J.E. Baader, S. Casalbuoni, M. Di Felice, U. Englisch, V. Grattoni, D. La Civita, M. Vannoni, M. Yakopov, P. Ziolkowski
EuXFEL, Schenefeld, Germany
S. Barbanotti, H.-J. Eckoldt, A. Hauberg, K. Jensch, S. Lederer, L. Lilje, R. Ramalingam, T. Schnautz, R. Zimmermann
DESY, Hamburg, Germany
A.W. Grau
KIT, Karlsruhe, Germany

Superconducting Undulators (SCUs) can produce higher photon flux and cover a wider photon energy range compared to permanent magnet undulators (PMUs) with the same vacuum gap and period length. To build the know-how to implement superconducting undulators for future upgrades of the European XFEL facility, two magnetic measurement test stands named SUNDAE 1 and 2 (Superconducting UNDulAtor Experiment) are being developed. SUNDAE1 will facilitate research and development on magnet design thanks to the possibility of training new SCU coils and characterizing their magnetic field. The experimental setup will allow the characterization of magnets up to 2m in length. These magnets will be immersed in a Helium bath at 2K or 4K temperature. In this article, we describe the experimental setup and highlight its expected performances.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOPT031

About •

Received ※ 03 June 2022 — Revised ※ 17 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 17 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOPT032

SUNDAE2 at EuXFEL: A Test Stand to Characterize the Magnetic Field of Superconducting Undulators

2649

J.E. Baader, S. Abeghyan, S. Casalbuoni, D. La Civita, B. Marchetti, M. Yakopov, P. Ziolkowski
EuXFEL, Schenefeld, Germany
H.-J. Eckoldt, A. Hauberg, S. Lederer, L. Lilje, T. Wohlenberg, R. Zimmermann
DESY, Hamburg, Germany
A.W. Grau
KIT, Eggenstein-Leopoldshafen, Germany

European XFEL foresees a superconducting undulator (SCU) afterburner in the SASE2 hard X-ray beamline. It consists of six 5m-long undulator modules with a 5mm vacuum gap, where each module contains two 2m-long coils and one phase shifter. Prior to installation, the magnetic field must be mapped appropriately. Two magnetic measurement test stands named SUNDAE 1 and 2 (Superconducting UNDulAtor Experiment) are being developed at European XFEL. While SUNDAE1 will be a vertical test stand to measure SCU coils up to two meters with Hall probes in a liquid or superfluid helium bath, SUNDAE2 will measure the SCU coils assembled in the final cryostat. This contribution presents the development status of SUNDAE2 and its main requirements.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOPT032

About •

Received ※ 07 June 2022 — Revised ※ 13 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 28 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOPT061

European XFEL Undulators - Status and Plans

2737

S. Casalbuoni, S. Abeghyan, J.E. Baader, U. Englisch, V. Grattoni, S. Karabekyan, B. Marchetti, H. Sinn, F. Wolff-Fabris, M. Yakopov, P. Ziolkowski
EuXFEL, Schenefeld, Germany

European XFEL has three undulator lines based on permanent magnet technology: two for hard and one for soft X-rays. The planar undulators can be tuned to cover the acceptance in terms of photon beam energy of the respective photon beamlines: 3.6-25 keV (SASE1/2) and 0.25-3 keV (SASE3) by changing the electron energy range between 11.5 GeV and 17.5 GeV and/or the undulator gap. In order to obtain different polarization modes, as required by the soft X-ray beamlines, a helical afterburner consisting of four APPLE X undulators designed by PSI has been installed at the downstream end of the present SASE3 undulator system. The European XFEL plans to develop the technology of superconducting undulators, which is of strategic importance for the facility upgrade. In order to extend the energy range above 30 keV a superconducting undulator afterburner is foreseen to be installed at the end of SASE2. This contribution presents the current status and the planned upgrades of the undulator lines at European XFEL.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOPT061

About •

Received ※ 07 June 2022 — Revised ※ 11 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 04 July 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)